Site Overlay

Eco Insulate

ECO INSULATE

PRODUCT DESCRIPTION

  • Eco Insulate is a thermal insulative barrier coating, formulated on an elastomeric polymer base.
  • This water-borne coating boasts cutting edge technology where glass microspheres are added.
  • Eco Insulate provides superior adhesion that proof to resist weathering, chalking and cracking.
  • This product create a Thermal barrier that is UV reflective and prevent thermal conductively.
  • The external coating proofs to show signifucant reduction in interior temperatures of facilities, that were coated, resulting in lower mecanical cooling.

PRODUCT BENEFITS

  • Improves life span of substrates that were coated
  • Thermal insulation resulting in lower cooling costs
  • Corrosion control
  • Encaptulation (Asbestos)
  • Highly stretchable and contract to its orginal form, therefore with standing thermal cycling.
  • No solvents, there for it is environmentally friendly and can be applied where rainwater is harvested.
  • No negative effect on human or animal life.
  • Significant waterproofing ability (No ponding longer than 48 hours)
  • Can be applied to all construction materials including shipping containers.
  • Spray, paint or roller applied

THERMAL REDUCTION BENEFIT

Ambient Temp

°C 18°C 25°C 36°C 45°C

Reduction

% 7 27 37 43

* Metal Sheeted Areas

  • Lower temperature losses were recorded where exterior ambient temperatures went below 8°C
  • Therefore creating a more livable environment and less heating.
  • More significant reduction in temperature are experienced where substrate temperatures are recorded on coated and non-coated areas.

TECHNICAL DATA

PARAMETER

Pure Acrylic

FINISH

Homogeneous: smooth, white

SELF PRIMER

Positive

PH

8.68

VISCOSITY

128ku

SPECIFIC GRAVITY

0.9522

TOXICITY

Material is non-toxic & requires no special ventilation during application. Contains no materials considered to be health hazards.

FLAMMABILITY

Non-flammable. Does not support flame spread

PACKAGE STABILITY

Approximate one year after opening: no settling or other undesirable effects. Materials completely dispersed after stirring.

ABRASION RESISTANCE

Medium to High

ELONGATION

70% with a 100% full memory

FUNGUS RESISTANCE

No fungus growth when material tested in an environment of three organisms.

V.O.C

78 grams per Litre

WATER, %

26%

SOLIDS BY MASS

50%

STANDARD PACKAGING

MATERIAL APPLICATION

PACKAGING

20 Liters

SURFACE PREPARATION

  • Surfaces to be sprayed / painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting.
  • Avoid application when the moisture is above 15%
  • Remove all unstable paint film.
  • Repair defected surfaces before application.

MATERIAL

Single component, ready-to-use from container with little stirring required.

APPROXIMATE COVERAGE

1 Litre per square meter

APPLICATION TEMPERATURE RANGE

Above 10°C

RECOATING

Excellent

PRIMARY CURE

3 hours at 25°C

FINAL CURE TIME

3 – 5 Days

AIRLESS SPRAY

Pressure : 1600 – 1700 psi

HEALTH & SAFETY

NOTE: We warranty only the quality of our product and the data sheet is based on results obtained from experience and tests. We reserve the right to change data without prior notice.

SAFETY PRECAUTIONS

  • Keep container tightly closed and keep out of reach of children or away from food and drink.
  • In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
  • Remove splashes from skin by using soap or water.
  • Always keep container in a secure upright position.
  • Dispose off any paint waste in accordance with the appropriateEHS Regulations Apply
Follow by Email
Facebook