Site Overlay

Eco Rubber

ECO RUBBER

PRODUCT DESCRIPTION

  • Eco Rubber is a waterproofing barrier coating, formulated on an elastomeric polymer base.
  • This water-borne coating boast with cutting edge technology where the formulation is highly UV resistant.
  • Eco Rubber provides superior adhesion that proof to resist weathering, chalking and cracking.
  • This product create a waterproofing membrane barrier that is UV reflective and prevents corrosion on metal substrates.
  • The external coating proofs to show significant reduction in colour fading due to the oxside colouring technology that is applied.

PRODUCT BENEFITS

  • Improves life span of substrates that were coated
  • Waterproofing at it’s best!
  • Corroson control
  • Encapsulation (Asbestos)
  • Highly stretchable and contract to its original form, therefore with standing thermal cycling.
  • No solvents, there for it is enviromentally friendly and can be applied where rainwater is harvested.
  • No negative effect on human or animal life.
  • Waterproofing that can withstand ponding.
  • Can be applied to all construction materials,even architecturally difficult area such as services gantrees.
  • Spray, paint or roller applied
  • Total ambient temperature application, no heating or prophane flame heating required.

MATERIAL APPLICATION

SURFACE PREPARATION

  • Surfaces to be sprayed / painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign materials. Allow all surfaces to dry completely prior to painting.
  • Avoid application when the moisture is above 15%
  • Remove all unstable paint film.
  • Repair defective surfaces before application.

MATERIAL

Single component, ready-to-use from container with little stirring required.

APPROXIMATE COVERAGE

1 kg per square meter

APPLICATION TEMPERATURE RANGE

Above 10°C

RECOATING

Excellent

PRIMARY CURE

3 hours at 25°C

FINAL CURE TIME

3 – 5 Days

AIRLESS SPRAY

Pressure : 1600 – 1700 psi

THINNER (VOLUME)

Must NOT be thinned

TECHNICAL DATA

PARAMETER

Pure Acrylic Polymer

FINISH

Homogeneous: smooth, verious colours

SELF PRIMER

Positive

PH

8.72

VISCOSITY

128ku

SPECIFIC GRAVITY

1.18

TOXICITY

Material is non-toxic and requires no special ventilation during application.

FLAMMABILTY

Non-flammable. Does not support flame spread. Class 3

PACKAGE STABILITY

One year + after opening: no settling or other undesirable effects. Materials completely dispersed after stirring.

ABRASION RESISTANCE

Medium to High. Not suitable for heigh traffic areas

ELONGATION

70% with a 100% full memory

FUNGUS RESISTANCE

No fungus growth when material tested in an enviroment of three organisms.

V.O.C

78 grams per Litre

WATER, %

11%

SOLIDS BY MASS

52%

TSC

64%

FISH EYE TEST

Non – Passed

FILM HARDNESS

Flexible will not harden over time

FLASH POINT

Water borne – not flammable

FIRE INDEX

Class 3

UV RESISTANCE

Will start to degrade after 7 – 10 + years

STANDARD PACKAGING

HEALTH & SAFETY

NOTE: We warranty only the quality of our product and the data sheet is based on results obtained from experience and tests. We reserve the right to change data without prior notice.

PACKAGING

20 kg / 200 kg

SAFETY PRECAUTIONS

  • Keep container tightly closed and keep out of reach of children or away from food and drink.
  • In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
  • Remove splashes from skin by using soap or water.
  •  Always keep container in a secure upright position.
  • Dispose of any paint waste in accordance with the appropriate EHS Regulations
Follow by Email
Facebook